Buff Rake Blade Filler Metal Rake Buffing Wheel Rake 2" x 4-1/2" Short Teeth

Description

BUFF RAKE FILLER METAL BLADE
-
SHORT TEETH
FOR REMOVING COMPOUND FROM BUFFING WHEELS
-
This is a
NEW
size metal rake,
referred
to as - Rake Blade - Filler - Wheel Rake ...  the serrated metal teeth are much shorter and closer than the original rake filler.
The steel filler measure 2" x 4-/5" and can be mounted and attached on a wooden board with the 2 mounting holes and held in-place with screws and nuts.
This filler is IDEAL for smaller and thinner diameter Buff wheel, will also work for larger diameters as well.
IMPORTANT
to note that the teeth will not remove to much buff material from your wheel.
NOTE: RAKE COMPARISON - See the 2nd and last picture - to show comparison of the short and the original rake
filler.
The original filler teeth height is
:
7/16" - 11mm
THIS NEW Filler has teeth that are 3mm shorter measuring approximately 5/16"  and closer together provides less removal of buff material especially on smaller diameters and thinner buff wheels.
CLEANING OLD COMPOUND AND FOR DRESSING BUFFING WHEELS - will give you the better results.
SPECIFICATION:
JETS Product # 0117-87
Made in USA
-
RAKE Segment
Width:
2" - 51mm
-
Length Overall:
4-1/2" - 114.4mm
-
Filler:
4 Rows
-
Filler Rake Teeth Height:
5/16" - 8mm +/-
WORK SAFE
Make sure to wear proper Face, Eye and Respiratory protection, required when buffing and polishing.
NOTE: Visit
JETSTOOLS
our ebay Store Listings, where you can see a line of buffing wheels, polishing compounds and many more
J
ewelers
E
quipment
T
ools
and
S
upplies
.
JETSINC.
5E   718 CKSP
M