-40%

DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In

$ 32.39

Availability: 35 in stock
  • Return shipping will be paid by: Buyer
  • Brand: DEI
  • Item must be returned within: 60 Days
  • Refund will be given as: Money Back
  • Condition: New
  • Manufacturer Part Number: 050501
  • Returns Accepted: Returns Accepted
  • California Prop 65 Warning: True

    Description

    Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods and much more, Works by blocking radiant heat from entering driver compartment, Will withstand direct high heat temperatures up to 1750°, Also serves as a barrier to unwanted road, tire, and engine noise, It is constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
    DEi 050501 Floor/Tunnel Shield II, Heat/Sound Insulation, 2 Ft x 21 In
    Sku # 35650501
    Mfr. Part # 050501
    Condition
    New
    Brand
    DEI
    Sold
    Each
    Details
    Info
    Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue.  Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
    Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
    With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
    Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.
    Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
    Blocks radiant heat from entering driver compartment
    Withstands direct high heat temperatures up to 1750°
    Serves as a barrier to unwanted road, tire, & engine noise
    Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
    Easy to form to shapes and contours
    Excellent heat & sound barrier
    Wind and water will not affect adhesive
    Minimum clearance required, only 3/16” thick
    Just trim, peel & stick
    Aggressive self-adhesive backing holds past 450°F
    Withstands 1750°F direct continuous heat
    Use to shield & reflect unwanted heat
    Multiple uses
    Adheres to almost any surface or material including to fiberglass
    (PDF)
    Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article.
    Learn more about the advantages of Boom Mat insulation as well as proper installation by reading
    Super Chevy Magazine's
    tech article. Boom Mat Installation - Quiet Cabin.
    Charts
    (PDF)
    WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
    Specs
    Sold in Quantity
    Each
    MFG. Part #
    050501
    Overall Width
    21.00
    Overall Length
    24.00
    GTIN Code
    607078505019
    Area
    3.5
    Reviews
    DEI Heat insulation
    Rated
    by HS on June 01, 2018
    Summary:
    Seems to reflect very well the heat from the headers and mufflers, now it's more comfortable to drive without feet burning :D
    Yes, I recommend this product.
    Unrolled from the box ,will lay flat - E
    Rated
    by Honesteddied on May 16, 2014
    Summary:
    Just the item I was looking for, I used the shields to insulate my 34 Ford fiber glass body above the mufflers and tail pipes where they are positioned close to the body floor.The bond of the shield to the under body is super strong, I know this, because while I was working on the body upside down on a cradle and transferring measurements from the chassis on floor behind, I mistakenly positioned 2 muffler shields in the wrong area and had to remove them. What a job, the adhesion was more than expected . My fingers are still numb. After cutting two new pieces and rounding the corners for a finished look, I laid the pieces on the edge of a flat table and rounded over the perimeter edges with a hand roller, when installed, I was pleased, they look factory.
    Cons:
    21"x 24"
    Pros:
    10 mil face is substantial and holds its form
    excellent adhesion
    Yes, I recommend this product.
    Related Items / Suggested Parts
    DEi 050503 Floor/Tunnel Shield II, Heat/Sound Insulation, 4 Ft x 42 In
    DEi 050508 Boom Mat Floor & Tunnel Shield II 21 x 48 Inch
    Shipping
    Combined Shipping:
    Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
    Freight Shipping:
    Some products are too large for standard ground delivery and must be shipped via truck freight.
    Please contact us via eBay Message for a freight shipping estimate.
    When possible, please provide a business or commercial address for delivery to eliminate additional fees.
    Please ensure the phone number provided is accurate to avoid delays.
    Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
    Tech Support
    We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
    About
    Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
    Return Policy
    We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
    Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
    All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
    Payment
    Accepted Payment Methods - PayPal and major credit cards are accepted.
    Terms - Immediate payment is required on all listings.
    To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
    Guarantee
    Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
    Disclaimer
    Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.