Hushmat Silver Ultra Bulk Kit, 12 x 23 Dampening Pads

Description

Thermal insulation from -30 degrees up to +400 degrees Fahrenheit, Easy to mold around uneven surfaces, Covers a total of 58 sq. ft., Pads measure 23" in length and 12" in width, Requires no surface prep before installing
Hushmat Silver Ultra Bulk Kit, 12 x 23 Dampening Pads
Sku # 91080515-SIL
Mfr. Part # 10501
Condition
New
Brand
Hushmat
Sold
Each
Details
Info
A HushMat Ultra Bulk Kit is universal and designed to treat an entire small car.   It is the best kit to purchase if you are doing a complete vehicle build. HushMat Ultra reduces temperature, vibration and road noise.  HushMat is the #1 Rated sound and thermal insulator by Corvette Restorer Magazine.Hear the rumble on the outside and Cool and Quiet on the inside with a HushMat Bulk Kit.
* HushMat Ultra requires no surface cleaning/preparation or heat       guns to install
* Thermal insulation from -30 degrees up to +400 degrees Fahrenheit
* Easy to mold around uneven surfaces
* NO surface prep - no alcohol or acetone wash needed
* No installation tools or heat guns required
* Self Adhesive peel and stick; no secondary glue and NO spray
* Trims with razor knife or household scissors
* Installs in 1/2 the time versus other brands
* Available in Silver or Black Foil
HushMat Bulk Kit contains thirty (30) 12” x 23” sheets or 58.1 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.
For the Highest performance install the HushMat Ultra Bulk Kit and HushMat Silencer Megabond 1/2" foam (Speedway Part #910-80524) on the Trunk Floor and over the wheel wells.  Install HushMat Silencer Megabond ¼” foam (Speedway Part #910-80522) on the back of your door trim panels and on the back of your headliner.  Install HushMat Ultra H2O damping paste (Speedway Part #910-80518) on the Trunk Lid for the ultimate sound and thermal insulating performance.  Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle.
(PDF)
Bulk Kit Application area:  Interior side of the following: Door Skins, door frame, firewall, floorpan, tunnel, roof skin, trunk floor, wheel wells, rear quarter panels and trunk lid.
See the .
(PDF)
Item Details
Sound deadening.  Thirty (30) 12" x 23" dampening pads - 58.7 square feet
Application
This Part Fits
(PDF)
(PDF)
Specs
Sold in Quantity
Each
Color
Silver
Notes
Includes (30) sheets that cover 58 square feet.
MFG. Part #
10501
Overall Width
12.00
Overall Length
23.00
Material Thickness
0.06
GTIN Code
881101105012
Area
58
Temp. Range
400° F
Reviews
Good, sticky, quiet stuff.
Rated
by KippyDo on August 27, 2019
Summary:
I'd call hushmat the Franks Red Hot Sauce of vehicle quieting products. I put that shate on everything! Really, isn't super easy to install, aside from those tight places in the vehicle, but that's no fault of the product. I went overkill and covered just about every surface in my sprinter van.
Yes, I recommend this product.
I have already purched more pf this product.
Rated
by Riley on July 05, 2017
Summary:
Help on phone is great, if I can not find it on site
Yes, I recommend this product.
Best Insulation
Rated
by TriFive Mike on February 13, 2016
Summary:
I have used have used them all and HushMat was by far the best. Easiest to install, molded really well to floor, and the sound difference was incredible. The others don't come close. Made my Bel Air ride like a new model.
Pros:
Soundproof
Yes, I recommend this product.
application was good
Rated
by Paul52 on January 26, 2013
Summary:
haven't had a chance to test sound deadening qualities yet. but product went on well and seems to adhere well. we used a roofing material on the doors first @ about 1/5 the cost of hushmat but didn't work around as well but it seems to have many of the same sound reducing qualities. This project was a 1937 chev pickup, fairly small job. The cabin on the next is a 1964 fairlane and the high price of the hushmat is going to be a factor.
Cons:
Pricey / Poor Value
Pros:
good adhesion
Yes, I recommend this product.
Great Product
Rated
by Beachrod on January 23, 2010
Summary:
I used this for the interior of a steel '34 Ford Coupe, which I had previously painted with a heat reflective insulating coating. HushMat goes on easily but I had few instances where I could use a full sheet at a time, between fitting behind inner panels and minimizing wrinkles due to compound curves. I would definitely use it again.
Pros:
Simple to use
Yes, I recommend this product.
Related Items / Suggested Parts
HushMat Ultra Multi-Use Kit
HushMat Ultra Door Kit - Thermal and Sound Insulation
HushMat Ultra Trunk Kit - Thermal & Sound Insulation
HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.