Hushmat Silver Ultra Door Kit, 12 x 12 Dampening Pads

Description

It is easy to mold around uneven surfaces, Can be trimmed with razor knife or household scissors, There are no installation tools or heat guns required, Provides thermal insulation from -30 degrees up to +400 degrees Fahrenheit, HushMat Ultra requires no surface cleaning/ preparation or heat guns to install
Hushmat Silver Ultra Door Kit, 12 x 12 Dampening Pads
Sku # 91080505-SIL
Mfr. Part # 10201
Condition
New
Brand
Hushmat
Sold
Each
Details
Info
A HushMat Ultra Door Kit is universal and designed to treat two full size doors. HushMat Ultra reduces vibration and makes your door slam solid. Apply five square feet to each door and you will notice an immediate improvement.
HushMat Ultra requires no surface cleaning/ preparation or heat guns to install
Thermal instulation from -30 degrees up to +400 degrees Fahrenheit
Sound deadening
Easy to mold around uneven surfaces
NO surface prep - no alcohol or acetone wash needed
No installation tools or heat guns required
Self Adhesive peel and stick – no secondary glue and NO spray
Trims with razor knife or household scissors
Installs in 1/2 the time versus other brands
Available in Silver or Black Foil
HushMat Door Kit contains ten (10) 12” x 12” sheets or 10 Square Feet of OEM Approved Ultra damping/insulating material. HushMat sheets are easy for one person to handle and install.
Use HushMat Ultra Door Kit and HushMat Silencer Megabond 1/4" foam (Speedway Part #910-80522) on the back of the door trim panel for the ultimate sound and thermal insulating performance. Check out Speedway’s HushMat ‘32 Coupe and ‘32 Sedan full vehicle kits for the manufacturer recommended kits for the complete vehicle.
Door Kit Application area: Interior side of the following: Door Skin, Door Frame around hardware, Door Panel if necessary.
See the.
Item Details
Ten (10) 12" x 12" dampening pads - 10.1 square feet
Application
This Part Fits
(PDF)
(PDF)
Charts
(PDF)
(PDF)
(PDF)
(PDF)
(PDF)
Specs
Sold in Quantity
Each
Color
Silver
Notes
Includes (10) sheets that cover 10 square feet.
MFG. Part #
10201
Overall Width
12.00
Overall Length
12.00
Material Thickness
0.06
GTIN Code
881101102011
Area
10
Temp. Range
400° F
Reviews
Reduces noise
Rated
by Tj's on June 14, 2017
Summary:
Easy to install very easy to apply on the interior of car.
Pros:
Easy To Set Up
Easy To Store
Increases Efficiency
Rugged Construction
Versatile
Yes, I recommend this product.
It did what I wanted it to do!
Rated
by unclejohn on February 18, 2015
Summary:
Properly applied it transformed my 1976 Vintage vehicle with El-Cheapo sounding doors into something that sounded like my late model Chrysler when the door was closed. It let's you know how far technology has come since the thing was built.
Cons:
it requires one to read instructions
Pros:
Good Price / Value
Yes, I recommend this product.
Does what it is supose to
Rated
by 1930hotrod on September 16, 2014
Summary:
Sticks well Folds well Cuts well Does even better if kept in the frig
Yes, I recommend this product.
Related Items / Suggested Parts
HushMat Ultra Multi-Use Kit
HushMat Ultra Trunk Kit - Thermal & Sound Insulation
HushMat Ultra Floor/Dash Kit-Thermal & Sound Insulation
HushMat Ultra Bulk Kit, Thermal and Sound Insulation
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.