Second Skin Damplifier Pro | XL Vehicle Pack | 72 Sheets + Roller | 120 Sqft

Description

Damplifier Pro - CLD *Made In The USA*
72 Sheets!
*COMES WITH A FREE WOODEN HAND ROLLER*
Damplifier Pro 2mm thick butyl vibration sheets
(10" X 12")
. Simply cut, peel & stick to any prepped sheet metal.
Foil - Annealed black foil with ghosted logo
Damplifier Pro
uses an ultra-thick 6.5 mil foil. Thicker foil means better sound deadening, vibration control, heat dissipation and easier installation with less risk of tearing.
Butyl Rubber Adhesive - Highest Quality *Made in the USA*
High temperature butyl adhesive with increased elastomeric properties.
Less fillers and more rubber means better vibration damping and noise reduction. 450 F heat rated, Damplifier Pro will not melt, out gas, or fall off.
Typical Places of Use:
Door Skins - Outer Skin & Inner Door Frame.
Floor - Firewall to rear deck seat wall.
Firewall - Cabin side or engine side. (450-degree heat rating).
Van/Semi/SUV Panels – Any sheet metal.
Pillars - A, B, and C pillars.
Trunk - Floor, walls, lid and spare tire area.
Generator Boxes - RV, Van, or any place a generator is used, place the product around the generator enclosure to kill the vibration noise (Must be 2" away from heat sources)
Computer tower walls - Kills the vibration noise resonating through the metal.
Headphone Mods - Over the ear headphones install to the inside of the shell to increase sound quality.
Screen Doors - Apply throughout the door to stop the cymbal like noise.
Coin Counting Machines – Install on the sheet metal.
Hospital/Warehouse metal Carts – Install to the sheet metal.
HVAC Ducts/Units – Install to any metal that is noisy.
If the Ebay shipping calculator seems high, please contact us and we will provide you with a custom quote!